(Amended by Ordinance No. 189256, effective December 21, 2018.) Whenever an application for water service is received, the Administrator or the Chief Engineer shall have authority to reject such application if in the judgment of the Chief Engineer, the service and meter size applied for is expected to be less than or greater than the size necessary for estimated use by the premises of the applicant. In such event, the Administrator or the Chief Engineer shall specify the appropriate size of service line and size and type of meter. The service size as determined by the Chief Engineer shall not be a warranty of sufficiency for pressure or volume of water to be afforded the premises. No service connection less than 3/4‑inch in size shall be installed. The installation of any required backflow prevention assembly may cause the pressure and or volume of water to be less than the distribution system is able to supply through a specific service. It is the responsibility of the applicant to demonstrate having calculated the effect of installing required backflow prevention assemblies.
General Information: 503-823-4000
1221 SW 4th Avenue, Room 110, Portland, OR 97204